Did you know ... Search Documentation:
html_write.pl -- Write HTML text
PublicShow source

The purpose of this library is to simplify writing HTML pages. Of course, it is possible to use format/3 to write to the HTML stream directly, but this is generally not very satisfactory:

  • It is a lot of typing
  • It does not guarantee proper HTML syntax. You have to deal with HTML quoting, proper nesting and reasonable layout.
  • It is hard to use satisfactory abstraction

This module tries to remedy these problems. The idea is to translate a Prolog term into an HTML document. We use DCG for most of the generation.

International documents

The library supports the generation of international documents, but this is currently limited to using UTF-8 encoded HTML or XHTML documents. It is strongly recommended to use the following mime-type.

Content-type: text/html; charset=UTF-8

When generating XHTML documents, the output stream must be in UTF-8 encoding.

Source html_set_options(+Options) is det
Set options for the HTML output. Options are stored in prolog flags to ensure proper multi-threaded behaviour where setting an option is local to the thread and new threads start with the options from the parent thread. Defined options are:
dialect(Dialect)
One of html4, xhtml or html5 (default). For compatibility reasons, html is accepted as an alias for html4.
doctype(+DocType)
Set the <|DOCTYPE DocType > line for page//1 and page//2.
content_type(+ContentType)
Set the Content-type for reply_html_page/3

Note that the doctype and content_type flags are covered by distinct prolog flags: html4_doctype, xhtml_doctype and html5_doctype and similar for the content type. The Dialect must be switched before doctype and content type.

Source html_current_option(?Option) is nondet
True if Option is an active option for the HTML generator.
Source page(+Content:dom)// is det
Source page(+Head:dom, +Body:dom)// is det
Generate a page including the HTML <!DOCTYPE> header. The actual doctype is read from the option doctype as defined by html_set_options/1.
Source html(+Content:dom)// is det
Generate HTML from Content. Generates a token sequence for print_html/2.
Source html_begin(+Env)// is det
Source html_end(+End)// is det
For html_begin//1, Env is a term Env(Attributes); for html_end//1 it is the plain environment name. Used for exceptional cases. Normal applications use html//1. The following two fragments are identical, where we prefer the first as it is more concise and less error-prone.
        html(table(border=1, \table_content))
        html_begin(table(border=1)
        table_content,
        html_end(table)
Source xhtml_ns(+Id, +Value)//
Demand an xmlns:id=Value in the outer html tag. This uses the html_post/2 mechanism to post to the xmlns channel. Rdfa (http://www.w3.org/2006/07/SWD/RDFa/syntax/), embedding RDF in (x)html provides a typical usage scenario where we want to publish the required namespaces in the header. We can define:
rdf_ns(Id) -->
        { rdf_global_id(Id:'', Value) },
        xhtml_ns(Id, Value).

After which we can use rdf_ns//1 as a normal rule in html//1 to publish namespaces from library(semweb/rdf_db). Note that this macro only has effect if the dialect is set to xhtml. In html mode it is silently ignored.

The required xmlns receiver is installed by html_begin//1 using the html tag and thus is present in any document that opens the outer html environment through this library.

Source html_root_attribute(+Name, +Value)//
Add an attribute to the HTML root element of the page. For example:
    html(div(...)),
    html_root_attribute(lang, en),
    ...
Source html_quoted(Text)// is det
Quote the value for normal (CDATA) text. Note that text appearing in the document structure is normally quoted using these rules. I.e. the following emits properly quoted bold text regardless of the content of Text:
        html(b(Text))
To be done
- Assumes UTF-8 encoding of the output.
Source html_quoted_attribute(+Text)// is det
Quote the value according to the rules for tag-attributes included in double-quotes. Note that -like html_quoted//1-, attributed values printed through html//1 are quoted atomatically.
To be done
- Assumes UTF-8 encoding of the output.
Source html_post(+Id, :HTML)// is det
Reposition HTML to the receiving Id. The html_post//2 call processes HTML using html//1. Embedded \-commands are executed by mailman/1 from print_html/1 or html_print_length/2. These commands are called in the calling context of the html_post//2 call.

A typical usage scenario is to get required CSS links in the document head in a reusable fashion. First, we define css//1 as:

css(URL) -->
        html_post(css,
                  link([ type('text/css'),
                         rel('stylesheet'),
                         href(URL)
                       ])).

Next we insert the unique CSS links, in the pagehead using the following call to reply_html_page/2:

        reply_html_page([ title(...),
                          \html_receive(css)
                        ],
                        ...)
Source html_receive(+Id)// is det
Receive posted HTML tokens. Unique sequences of tokens posted with html_post//2 are inserted at the location where html_receive//1 appears.
See also
- The local predicate sorted_html//1 handles the output of html_receive//1.
- html_receive//2 allows for post-processing the posted material.
Source html_receive(+Id, :Handler)// is det
This extended version of html_receive//1 causes Handler to be called to process all messages posted to the channal at the time output is generated. Handler is called as below, where PostedTerms is a list of Module:Term created from calls to html_post//2. Module is the context module of html_post and Term is the unmodified term. Members in PostedTerms are in the order posted and may contain duplicates.
  phrase(Handler, PostedTerms, HtmlTerms, Rest)

Typically, Handler collects the posted terms, creating a term suitable for html//1 and finally calls html//1.

Source layout(+Tag, -Open, -Close) is det[multifile]
Define required newlines before and after tags. This table is rather incomplete. New rules can be added to this multifile predicate.
Arguments:
Tag- Name of the tag
Open- Tuple M-N, where M is the number of lines before the tag and N after.
Close- Either as Open, or the atom - (minus) to omit the close-tag or empty to indicate the element has no content model.
To be done
- Complete table
Source print_html(+List) is det
Source print_html(+Out:stream, +List) is det
Print list of atoms and layout instructions. Currently used layout instructions:
nl(N)
Use at minimum N newlines here.
mailbox(Id, Box)
Repositioned tokens (see html_post//2 and html_receive//2)
Source html_print_length(+List, -Len) is det
Determine the content length of a token list produced using html//1. Here is an example on how this is used to output an HTML compatible to HTTP:
        phrase(html(DOM), Tokens),
        html_print_length(Tokens, Len),
        format('Content-type: text/html; charset=UTF-8~n'),
        format('Content-length: ~d~n~n', [Len]),
        print_html(Tokens)
Source reply_html_page(:Head, :Body) is det
Source reply_html_page(+Style, :Head, :Body) is det
Provide the complete reply as required by http_wrapper.pl for a page constructed from Head and Body. The HTTP Content-type is provided by html_current_option/1.
Source html_meta(+Heads) is det
This directive can be used to declare that an HTML rendering rule takes HTML content as argument. It has two effects. It emits the appropriate meta_predicate/1 and instructs the built-in editor (PceEmacs) to provide proper colouring for the arguments. The arguments in Head are the same as for meta_predicate or can be constant html. For example:
:- html_meta
      page(html,html,?,?).

Re-exported predicates

The following predicates are re-exported from other modules

Source html(+Content, +Vars, +VarDict, -DOM) is det
The predicate html/4 implements HTML quasi quotations. These quotations produce a DOM term that is suitable for html//1 and other predicates that are declared to consume this format. The quasi quoter only accepts valid, but possibly partial HTML documents. The document must begin with a tag. The quoter replaces attributes or content whose value is a Prolog variable that appears in the argument list of the html indicator. If the variable defines content, it must be the only content. Here is an example, replacing both a content element and an attribute. Note that the document is valid HTML.
  html({|html(Name, URL)||
         <p>Dear <span class="name">Name</span>,

         <p>You can <a href="URL">download</a> the requested
         article now.
         |}

Undocumented predicates

The following predicates are exported, but not or incorrectly documented.

Source reply_html_page(Arg1, Arg2, Arg3)
Source print_html(Arg1, Arg2)
Source html_end(Arg1, Arg2, Arg3)
Source page(Arg1, Arg2, Arg3, Arg4)
Source page(Arg1, Arg2, Arg3, Arg4, Arg5)