% this is both a latex file and a quintus prolog file
% the only difference is that the latex version comments out the following
% line:
:- module(snark_theorist,[]).
:- module(snark_theorist).
/*
\documentstyle[12pt,makeidx]{article}
\pagestyle{myheadings}
\markright{Theorist to Prolog (th2.tex)}
\makeindex
\newtheorem{example}{Example}
\newtheorem{algorithm}{Algorithm}
\newtheorem{theorem}{Theorem}
\newtheorem{lemma}[theorem]{Lemma}
\newtheorem{definition}{Definition}
\newtheorem{corollary}[theorem]{Corollary}
\newenvironment{proof}{\begin{quote} {\bf Proof: }}{$\Box$\end{quote}}
\newenvironment{prolog}{\begin{tabbing} \hbox{2cm}\=\hbox{1cm}\=\kill
}{\end{tabbing}}
\newcommand{\IF}{\ $:-$\\\>}
\newcommand{\AND}{,\\\>}
\title{A Theorist to Prolog Compiler (th2.tex)\thanks{Copyright \copyright 1990
David Poole. All rights reserved.}}
\author{David Poole\\
Department of Computer Science,\\
University of British Columbia,\\
Vancouver, B.C. Canada V6T 1W5
(604) 228-6254\\
poole@cs.ubc.ca}
\begin{document}
\maketitle
\begin{abstract}
Artificial intelligence researchers have been designing representation
systems for default and abductive reasoning.
Logic Programming researchers have been working on techniques to improve
the efficiency of Horn Clause deduction systems.
This paper describes how {\em Theorist\/} can be
translated into Quintus Prolog.
The verbatim code is the actual running code.
This should not be seen as {\em The Theorist System}, but rather
as one implementation of the Theorist framework. Theorist should be
seen as the idea that much reasoning can be done by theory formation
from a fixed set of possible hypotheses.
This implementation is based on a complete linear resolution theorem prover
which does not multiply out subterms. It also carries out incremental
consistency checking.
Note that there is nothing in this document which forces the control strategy
of Prolog. This is a compiler from Theorist to a Horn-clause reasoner
with negation as failure; nothing precludes any other search strategy
(e.g., dependency directed backtracking, constraint propagation).
This is intended to be a runnable specification, which runs fast
(e.g., for the common intersection between Theorist and Prolog (i.e., Horn
clauses) Theorist code runs about half the speed of compiled Quintus
Prolog code).
This code is available electronically from the author.
\end{abstract}
\tableofcontents
\section{Introduction}
Many people in Artificial Intelligence have been working on default reasoning
and abductive diagnosis systems
\cite{reiter80,mccarthy86,cox87,poole:lf}. The systems implemented so far
(eg., \cite{brewka86,lifschitz85,ginsberg87,pga}) are only prototypes or
have been developed in ways that cannot take full advantage in the
advances of logic programming implementation technology.
Many people are working on making logic programming systems more efficient.
These systems, however, usually assume that the input is in the form of
Horn clauses with negation as failure. This paper shows how to implement
the default reasoning system Theorist \cite{poole:lf,pga}
by compiling its input into Horn clauses with negation as failure, thereby
allowing direct
use the advances in logic programming implementation technology.
Both the compiler and the compiled code can take advantage of
these improvements.
We have been running this implementation on standard
Prolog compilers (in particular Quintus Prolog) and it outperforms
all other default reasoning systems that the author is aware of.
It is, however, not restricted to the control structure of Prolog. There is
nothing in the compiled code which forces it to use Prolog's
search strategy.
Logic programming and other researchers are working on alternate
control structures which seem very appropriate for default
and abductive reasoning.
Advances in parallel inference (e.g.,\ \cite{pie}),
constraint satisfaction \cite{dincbas,vanh} and dependency directed backtracking
\cite{dekleer86,doyle79,cox82}
should be able to be directly applicable to the code produced by this compiler.
We are thus effecting a clear
distinction between the control and logic of our default reasoning systems
\cite{kowalski}. We can let the control people concentrate on efficiency
of Horn clause systems, and these will then be directly applicable to
those of us building richer representation systems.
The Theorist system has been designed to allow maximum flexibility in
control strategies while still giving us the power of assumption-based
reasoning that are required for default and abductive reasoning.
This is a step towards having representation and reasoning systems
which are designed for correctness being able to use the most
efficient of control
strategies, so we can have the best of expressibility and efficiency.
\section{Theorist Framework} \label{theorist}
Theorist \cite{poole:lf,pga} is a logical reasoning system for default reasoning
and diagnosis. It is based on the idea of theory formation from a fixed
set of possible hypotheses.
This implementation is of the version of Theorist described in \cite{poole:lf}.
The user provides three sets of first order formulae
\begin{itemize}
\item[${\cal F}$] is a set of closed formulae called the {\em facts\/}.
These are intended to be true in the world being modelled.
\item[$\Delta$] is a set of formulae which
act as {\em possible hypotheses}, any ground instance of which
can be used in an explanation if consistent.
\item[$\cal C$] is a set of closed formulae taken as constraints.
The constraints restrict what can be hypothesised.
\end{itemize}
We assume that ${\cal F}\cup C$ is consistent.
\begin{definition} \em
a {\bf scenario} of ${\cal F},\Delta$ is a set $D \cup {\cal F}$ where
$D$ is a set of ground instances of elements
of $\Delta$ such that $D\cup {\cal F} \cup C$ is consistent.
\end{definition}
\begin{definition} \em
If $g$ is a closed formula then an {\bf explanation} of $g$ from ${\cal F},\Delta$
is a scenario of ${\cal F},\Delta$ which implies $g$.
\end{definition}
That is, $g$ is explainable from ${\cal F},\Delta$ if there is a set
$D$ of ground instances of elements of $\Delta$ such that
\begin{quote}
${\cal F} \cup D \models g$ and\\
${\cal F} \cup D \cup C$ is consistent
\end{quote}
${\cal F} \cup D$ is an explanation of $g$.
In other papers we have described how this can be the basis of
default and abductive reasoning systems \cite{pga,poole:lf,poole:dc,poole:dd}.
If we are using this for prediction then possible hypotheses can be seen
as defaults. \cite{poole:lf} describes how this formalism can account
for default reasoning. This is also a framework for abductive reasoning
where the possible hypotheses are the base causes we are prepared
to accept as to why some observation was made \cite{pga}.
We will refer to possible hypotheses as defaults.
One restriction that can be made with no loss of expressive power
is to restrict possible hypotheses to just atomic forms with no
structure \cite{poole:lf}. This is done by naming the defaults.
\subsection{Syntax} \label{syntax}
The syntax of Theorist is designed to be of maximum flexibility.
Virtually any syntax is appropriate for wffs; the formulae are translated
into Prolog clauses without mapping out subterms. The theorem
prover implemented in the Compiler can be seen as a non-clausal theorem
prover \cite{poole:clausal}.
A {\em wff\/} is a well formed formula made up of arbitrary combination of
equivalence (``=='', ``$equiv$''),
implication (``$=>$'', ``$<-$''), disjunction (``$or$'', ``;''),
conjunction (``$and$'', ``$\&$'', ``,'') and negation (``$not$'', ``\~{}'')
of atomic symbols. Variables follow the Prolog convention
of being in upper case. There is no explicit quantification.
A {\em name\/} is an atomic symbol with only free variables as arguments.
The following gives the syntax of the Theorist code:
\begin{description}
\item[\bf fact]
$w.$\\
where $w$ is a wff,
means that $(\forall w) \in {\cal F}$; i.e., the universal closure of $w$ (all
variables universally quantified) is a fact.
\item[\bf default]
$d.$\\
where $d$ is a name,
means that $d\in \Delta$; i.e., $d$ is a default (a possible hypothesis).
\item[\bf default]
$d:w.$\\
where $d$ is a name and $w$ is a wff means $w$, with name $d$ can
be used in a scenario if it is consistent.
Formally it means $d\in \Delta$ and
$(\forall d\Rightarrow w) \in {\cal F}$.
\item[\bf constraint]
$w.$\\
where $w$ is a wff means $\forall w\in \cal C$.
\item[\bf prolog]
$p.$\\
where $p$ is an atomic symbol means any Theorist call to $p$ should
be proven in Prolog. This allows us to use built-in predicates of pure Prolog.
One should not expect Prolog's control predicates to work.
\item[\bf explain]
$w.$\\
where $w$ is an arbitrary wff,
gives all explanations of $\exists w$.
\item[\bf predict]
$w.$\\
where $w$ is a arbitrary ground wff,
returns ``yes'' if $w$ is in every extension of the defaults
and ``no'' otherwise.
If it returns ``yes'', a set of explanations is returned, if
it returns ``no'' then a scenario from which $g$ cannot be explained is
returned (this follows the framework of \cite{poole:dc}).
\end{description}
In this compiler these are interpreted as commands to Prolog.
The interface will thus be the Prolog interface with some predefined
commands.
\subsection{Compiler Directives}
The following are compiler directives:
\begin{description}
\item[\bf thconsult] {\em filename.}\\
reads commands from {\em filename}, and asserts and/or executes them.
\item[\bf thtrans] {\em filename.}\\
reads commands from {\em filename} and translates them into Prolog
code in the file {\em filename.pl}.
\item[\bf thcompile] {\em filename.}\\
reads commands from {\em filename}, translates them into the file
{\em filename.pl} and then compiles this file. ``explain'' commands in
the file are not interpreted.
\item[\bf dyn] {\em atom.}\\
should be in a file and declares that anything matching the atom
is allowed to be asked or added to. This should appear before any
use of the atom. This corresponds to the ``dynamic'' declaration of
Quintus Prolog. This is ignored except when compiling a file.
\end{description}
There are some other commands which allow one to set flags. See section
\ref{flags} for more detail on setting checking and resetting flags.
\section{Overview of Implementation}
In this section we assume that we have a deduction system
(denoted $\vdash$) which has the
following properties (such a deduction system will be defined in the
next section):
\begin{enumerate}
\item It is sound (i.e., if $A\vdash g$ then $A\models g$).
\item It is complete in the sense that if $g$ follows from a consistent
set of formulae, then $g$ can be proven. I.e., if $A$ is consistent and
$A\models g$ then $A\vdash g$.
\item If $A\vdash g$ then $A\cup B\vdash g$; i.e., adding in extra facts will
not prevent the system from finding a proof which previously existed.
\item It can return instances of predicates which were used in the proof.
\end{enumerate}
The basic idea of the implementation follows the definition on explainability:
\begin{algorithm}\em \label{basic-alg}
to explain $g$
\begin{enumerate}
\item try to prove $g$ from ${\cal F}\cup \Delta$. If no proof exists, then
$g$ is not explainable. If there is a proof, let $D$ be the set of instances of
elements of $\Delta$ used in the proof. We then know
\[{\cal F}\cup D \models g\]
by the soundness of our proof procedure.
\item show $D$ is consistent with ${\cal F}\cup C$
by failing to prove it is inconsistent.
\end{enumerate}
\end{algorithm}
\subsection{Consistency Checking}
The following two theorems are important for implementing the consistency
check:
\begin{lemma} \label{incremantal}
If $A$ is a consistent set of formulae and
$D$ is a finite set of ground instances of possible hypotheses, then
if we impose arbitrary ordering on the elements of $D=\{d_1,...,d_n\}$
\begin{center}
$A\cup D$ is inconsistent\\if and only if\\
there is some $i$, $1\leq i \leq n$ such that
$A\cup \{d_1,...,d_{i-1}\}$ is consistent and\\
$A\cup \{d_1,...,d_{i-1}\}\models \neg d_i$.
\end{center}
\end{lemma}
\begin{proof}
If $A \cup D $ is inconsistent there is some least $i$ such
that $A\cup \{d_1,...,d_i\}$ is inconsistent. Then we must have
$A\cup \{d_1,...,d_{i-1}\}$ is consistent (as $i$ is minimal) and
$A\cup \{d_1,...,d_{i-1}\}\models \neg d_i$ (by inconsistency).
\end{proof}
This lemma says that we can show that ${\cal F}\cup C \cup \{d_1,...,d_n\}$ is
consistent if we can show that for all $i$, $1\leq i \leq n$,
${\cal F}\cup C\cup \{d_1,...,d_{i-1}\}\not\vdash \neg d_i$.
If our theorem prover can show there is no proof of all of
the $\neg d_i$, then we have consistency.
This lemma indicates that we can implement Theorist by incrementally failing to
prove inconsistency. We need to try to prove the negation of the
default in the context of all previously assumed defaults.
Note that this ordering is arbitrary.
The following theorem expands on how explainability can be computed:
\begin{theorem} \label{consisthm}
If ${\cal F} \cup C$ is consistent,
$g$ is explainable from ${\cal F},\Delta$ if and only if there is a ground
proof of $g$ from ${\cal F}\cup D$ where $D=\{d_1,...,d_n\}$
is a set of ground instances
of elements of $\Delta$ such that
${\cal F} \wedge C \wedge \{d_1,...,d_{i-1}\}\not\vdash \neg d_i$
for all $i,1\leq i \leq n$.
\end{theorem}
\begin{proof}
If $g$ is explainable from ${\cal F},\Delta$, there is a set $D$ of ground instances
of elements of $\Delta$ such that ${\cal F}\cup D \models g$ and ${\cal F} \cup D \cup C$
is consistent. So there is a ground proof of $g$ from ${\cal F} \cup D$.
By the preceding lemma
${\cal F}\cup D \cup C$ is consistent so there can be no sound proof
of inconsistency. That is, we cannot prove
${\cal F} \wedge C \wedge \{d_1,...,d_{i-1}\}\vdash \neg d_i$ for any $i$.
\end{proof}
This leads us to the refinement of algorithm \ref{basic-alg}:
\begin{algorithm} \em
to explain $g$ from ${\cal F},\Delta$
\begin{enumerate}
\item Build a ground proof of $g$ from ${\cal F}\cup \Delta$. Make $D$
the set of instances of elements of $\Delta$ used in the proof.
\item For each $i$, try to prove $\neg d_i$ from ${\cal F} \wedge C
\wedge \{d_1,...,d_{i-1}\}$. If all
such proofs fail, $D$ is an explanation for $g$.
\end{enumerate}
\end{algorithm}
Note that the ordering imposed on the $D$ is arbitrary. A sensible one is
the order in which the elements of $D$ were generated. Thus when
a new hypothesis is used in the proof, we try to prove its negation from
the facts and the previously used hypotheses. These proofs are independent
of the original proof and can be done as they are generated
as in negation as failure (see section \ref{incremental}), or can be done
concurrently.
\subsection{Variables}
Notice that theorem \ref{consisthm} says that $g$ is explainable
if there is a ground proof. There is a problem that arises
to translate the preceding algorithm (which assumes ground proofs)
into an algorithm which does not build ground proofs (eg., a standard
resolution theorem prover), as we may have variables in the forms
we are trying to prove the negation of.
A problem arises
when there are variables in the $D$ generated.
Consider the following example:
\begin{example}\em
Let $ \Delta = \{p(X)\}$. That is, any instance of $p$ can be used if it is
consistent.
Let ${\cal F} = \{ \forall Y (p(Y) \Rightarrow g), \neg p(a)\}$. That is, $g$ is
true if there is a $Y$ such that $p(Y)$.
According to our semantics,
$g$ is explainable with the explanation $\{p(b)\}$,
which is consistent with ${\cal F}$ (consider the interpretation $I=\{\neg p(a),p(b)\}$
on the domain $\{a,b\}$), and implies $g$.
However,
if we try to prove $g$, we generate $D=\{p(Y)\}$ where $Y$ is free
(implicitly a universally quantified variable).
The existence of the fact $\neg p(a)$ should not make it
inconsistent, as we want $g$ to be explainable.
\end{example}
\begin{theorem}
It is not adequate to only consider interpretations in the
Herbrand universe of ${\cal F}\cup \Delta \cup C$ to determine explainability.
\end{theorem}
\begin{proof}
consider the example above; the Herbrand universe is just
the set $\{a\}$. Within this domain there is no consistent
explanation to explain $g$.
\end{proof}
This shows that Herbrand's theorem is not applicable to the whole system.
It is, however, applicable to each of the deduction steps \cite{chang}.
So we need to generate a ground proof of $g$. This leads us to:
\begin{algorithm} \em \label{det-alg}
To determine if $g$ is explainable from ${\cal F},\Delta$
\begin{enumerate}
\item generate a proof of $g$ using elements of ${\cal F}$ and $ \Delta$ as axioms.
Make $D_0$ the set of instances of $ \Delta$ used in the proof;
\item form $D_1$ by replacing free variables in $D_0$ with unique constants;
\item add $D_1$ to ${\cal F}$ and try to prove an inconsistency (as in the
previous case). If a
complete search for a proof fails, $g$ is explainable.
\end{enumerate}
\end{algorithm}
This algorithm can now be directly implemented by a resolution theorem prover.
\begin{example}\em
Consider ${\cal F}$ and $\Delta$ as in example 1 above.
If we try to prove $g$, we use the hypothesis instance $p(Y)$.
This means that $g$ is provable from any instance of $p(Y)$.
To show $g$ cannot be explained, we must show that all of the instances
are inconsistent. The above algorithm says
we replace $Y$ with a constant $\beta$.
$p(\beta)$ is consistent with the facts.
Thus we can show $g$ is explainable.
\end{example}
\subsection{Incremental Consistency Checking} \label{incremental}
Algorithm \ref{det-alg} assumed that we only check consistency at the end.
We cannot replace free variables by a unique constant until the end
of the computation.
This algorithm can be further refined by considering cases
where we can check consistency at the time the hypothesis is generated.
Theorem \ref{incremantal} shows that we can check consistency incrementally
in whatever order we like. The problem is to determine whether we have
generated the final version of a set of hypotheses.
If there are no variables in our set of hypotheses, then we can check
consistency as soon as they are generated.
If there are variables in a hypothesis, then we cannot guarantee that the
form generated will be the final form of the hypothesis.
\begin{example}\em
Consider the two alternate set of facts:
\begin{eqnarray*}
\Delta&=\{&p(X)\ \}\\
{\cal F}_1&=\{&\forall X \ p(X) \wedge q(X) \Rightarrow g,\\
&&\neg p(a),\\
&&q(b) \ \}\\
{\cal F}_2&=\{&\forall X \ p(X) \wedge q(X) \Rightarrow g,\\
&&\neg p(a),\\
&&q(a) \ \}
\end{eqnarray*}
Suppose we try to explain $g$ by first explaining $p$ and then explaining $q$.
Once we have generated the hypothesis $p(X)$, we have not enough information to
determine whether the consistency check should succeed or fail.
The consistency check for ${\cal F}_1$ should succeed (i.e, we should conclude
with a consistent instance, namely $X=b$), but the
consistency check for ${\cal F}_2$ should fail (there is no consistent value
for the $X$ which satisfies $p$ and $q$).
We can only determine the consistency after we have proven $q$.
\end{example}
There seems to be two obvious solutions to this problem,
the first is to allow the consistency check to return constraints on the
values (eg., \cite{edmonson}). The alternate (and simpler) solution is
to delay the evaluation of the consistency check until all of the variables
are bound (as in \cite{naish86}), or until we know that the variables
cannot be bound any more. In particular we know that a variable cannot be
bound any more at the end of the computation.
The implementation described in this paper
does the simplest form of incremental consistency checking, namely it computes
consistency immediately for those hypotheses with no variables and delays
consistency checking until the end for hypotheses containing variables
at the time they are generated.
\section{The Deduction System} \label{deduction}
This implementation is based on linear resolution \cite{chang,loveland78}.
This is complete in the
sense that if $g$ logically follows from some {\em consistent} set of
clauses $A$, then there is a linear resolution proof of $g$ from $A$.
SLD resolution of Prolog \cite{lloyd} can be seen as linear resolution with
the contrapositive and ancestor search removed.
To implement linear resolution in Prolog, we add two things
\begin{enumerate}
\item we use the contrapositive of our clauses. If we have the clause
\begin{verse}
$L_1 \vee L_2 \vee ... \vee L_n$
\end{verse}
then we create the $n$ rules
\begin{verse}
$L_1 \leftarrow \neg L_2 \wedge ... \wedge \neg L_n$\\
$L_2 \leftarrow \neg L_1 \wedge \neg L_3 \wedge ... \wedge \neg L_n$\\
$...$\\
$L_n \leftarrow \neg L_1 \wedge ... \wedge \neg L_{n-1}$
\end{verse}
as rules. Each of these can then be used to prove the left hand literal
if we know the other literals are false. Here we are treating the negation
of an atom as a different Prolog atom (i.e.,\ we treat $\neg p(\overline{X})$
as an atom $notp(\overline{X})$).
\item the ancestor cancellation rule. While trying to prove $L$ we can assume
$\neg L$. We have a subgoal proven if it unifies with the negation of
an ancestor in the proof tree.
This is an instance of proof by contradiction. We can see this as assuming
$\neg L$ and then when we have proven $L$ we can discharge the assumption.
\end{enumerate}
One property of the deduction system that we want is the ability to
implement definite clauses with a constant factor overhead over
using Prolog. One way to do this is to keep two lists of ancestors
of any node: $P$ the positive (non negated atoms) ancestors
and $N$ the negated ancestors. Thus for a positive subgoal we
only need to search for membership in $N$ and for a negated subgoal we only
need to search $P$.
When we have definite clauses, there are no negated subgoals, and so
$N$ is always empty. Thus the ancestor search always consists
of checking for membership in an empty list. The alternate
contrapositive form of the clauses are never used.
Alternate, more complicated ways to do ancestor search
have been investigated \cite{poole:grace}, but this implementation
uses the very simple form given above.
Another tempting possibility is to use the near-Horn resolution
of \cite{loveland87}. More work needs to be done on this area.
\subsection{Disjunctive Answers}
For the compiler to work properly we need to be able to return
disjunctive answers. We need disjunctive answers for the case
that we can prove only a disjunctive form of the query.
For example, if we can prove $p(a)\vee p(b)$ for the
query $?p(X)$, then we want the answer $X= a$ or $b$.
This can be seen as ``if the answer is not $a$ then the
answer is $b$''.
To have the answer $a_1\vee...\vee a_n$, we need to have a proof
of ``If the answer is not $a_1$ and not $a_2$ and ... and not $a_{n-1}$
then the answer is $a_n$''.
We collect up conditions on the proof of
alternate answers that we are assuming are not true in order to have
the disjunctive answer.
This is implemented by being able to assume the negation of the top level
goal as long as we add it to the set of answers. To do this we carry a list
of the alternate disjuncts that we are assuming in proving the top level goal.
\subsection{Conversion to Clausal Form}
It is desirable that we can convert an
arbitrary well formed formula into clausal (or rule) form
without mapping out subterms. Instead of distributing, we do this by
creating a new term to refer to the disjunct.
Once a formula is in negation normal form, then the normal way
to convert to clausal form \cite{chang} is to
convert something of the form
\[\alpha \vee (\beta \wedge \gamma)\]
by distribution into
\[(\alpha \vee \beta) \wedge (\alpha \vee \gamma)\]
and so mapping out subterms.
The alternate \cite{poole:clausal} is to create a new relation $p$ parameterised
with the variables in common with $\alpha$ and $\beta \wedge \gamma$.
We can then replace $\beta \wedge \gamma$ by $p$ and then add
\[(\neg p \vee \beta)\wedge (\neg p \vee \gamma)\]
to the set of formulae.
This can be embedded into the compiler by using
Prolog ``or'' instead of actually building the $p$.
(Alternatively we can define ``or'' by defining the
clause $(p;q)\leftarrow p$ and $(p;q)\leftarrow q$.)
We build up the clauses so that the computation runs
without any multiplying out of subterms.
This is an instance of the general procedure of making clausal
theorem provers into non-clausal theorem provers \cite{poole:clausal}.
\section{Details of the Compiler}
In this section we give actual code which converts
Theorist code into Prolog code.
The compiler is described here in a bottom up fashion; from the
construction of the atoms to compilation of general formulae.
The compiler is written in Prolog and the
target code for the compiler is Prolog code (in particular Horn
clauses with negation as failure). There are no ``cuts'' or other
non-logical ``features'' of Prolog which depend on Prolog's
search strategy in the compiled code.
Each Theorist wff gets locally translated into a set of
Prolog clauses.
\subsection{Target Atoms}
For each Theorist predicate symbol $r$ there are 4 target predicate
symbols, with the following informal meanings:
\begin{description}
\item[prv\_tru\_r] meaning $r$ can be proven from the facts and the constraints.
\item[prv\_not\_r] meaning $\neg r$ can be proven from the facts
and the constraints.
\item[ex\_tru\_r] meaning $r$ can be explained from ${\cal F},\Delta$.
\item[ex\_not\_r] meaning $\neg r$ can be explained from ${\cal F},\Delta$.
\end{description}
The arguments to these built predicate symbols will contain all
of the information that we need to prove or explain instances of the source
predicates.
\subsubsection{Proving}
For relation $r(-args-)$ in the source code we want to produce object
code which says that $r(-args-)$ (or its negation)
can be proven from the facts and constraints and the current set
of assumed hypotheses.
For the source relation
\[r( - args -)\]
(which is to mean that $r$ is a relation with $-args-$ being the
sequence of its arguments),
we have the corresponding target relations
\[prv\_tru\_r( - args - , Ths, Anc)\]
\[prv\_not\_r( - args - , Ths, Anc)\]
which are to mean that $r$ (or $\neg r$) can be proven
>from the facts and ground hypotheses
$Ths$ with ancestor structure $Anc$.
These extra arguments are:
\begin{description}
\item $Ths$ is a list of ground defaults.
These are the defaults we have already assumed and so define the context in
which to prove $r(-args-)$.
\item $Anc$ is a structure of the form $anc(P,N)$ where $P$ and $N$ are
lists of source atoms. Interpreted procedurally,
$P$ is the list of positive (not negated) ancestors of
the goal in a proof and $N$ is the list of negated ancestors
in a proof. As described in section \ref{deduction} we conclude some goal
if it unifies with its negated ancestors.
\end{description}
Declaratively,
\[prv\_tru\_r( - args - , Ths, anc(P,N))\]
means
\[{\cal F}\cup Ths \cup \neg P \cup N \models r(-args-)\]
\subsubsection{Explaining}
There are two target relations for explaining associated with
each source relation $r$. These are $ex\_tru\_r$ and $ex\_not\_r$.
For the source relation:
\[r( - args -)\]
we have two target new relations for explaining $r$:
\[ex\_tru\_r( - args - , Ths, Anc, Ans)\]
\[ex\_not\_r( - args - , Ths, Anc, Ans)\]
These mean that $r(-args-)$ (or $\neg r(-args-)$) can be explained, with
\begin{description}
\item[$Ths$] is the structure of the incrementally built hypotheses
used in explaining $r$. There are two statuses of hypotheses we
use; one the defaults that are ground and so can be proven
consistent at the time of generation;
the other the hypotheses with free variables at the time they
are needed in the proof, for which we defer consistency
checking (in case the free variables get instantiated later in the proof).
$Ths$ is essentially
two difference lists, one of the ground defaults already
proven consistent and one of the
deferred defaults. $Ths$ is of the form
\[ths(T_1,T_2,D_1,D_2)\]
which is to mean that $T_1$ is the consistent hypotheses before
we try to explain $r$, and
and $T_2$ is the list of consistent hypotheses which includes
$T_1$ and those hypotheses assumed to explain $r$.
Similarly, $D_1$ is the list of deferred hypotheses before we consider the goal
and $D_2$ is the list of resulting deferred hypotheses used in explaining $r$.
\item[$Anc$] contains the ancestors of the goal. As in the previous case,
this is a pair of the form
$anc(P,N)$ where $P$ is the list of positive ancestors of the goal,
and $N$ is the list of negated ancestors of the goal.
\item[$Ans$] contains the answers we are considering in difference list form
$ans(A_1,A_2)$, where $A_1$ is the answers before
proving the goal, and $A_2$ is the answers after proving the goal.
\end{description}
The semantics of
\[ex\_tru\_r(-args-,ths(T_1,T_2,D_1,D_2),anc(P,N),ans(A_1,A_2))\]
is defined by
\[{\cal F}\cup T_2 \cup D_2 \cup \neg P \cup N \cup A_2 \models r(-args-) \]
where $T_1\subseteq T_2$, $D_1\subseteq D_2$ and $A_1\subseteq A_2$, and
such that
\[{\cal F}\cup T_2 \hbox{ is consistent}\]
\subsubsection{Building Atoms}
The procedure {\em new\_lit$($Prefix, Reln, Newargs, Newreln\/}$)$ constructs
a new atom, $Newreln$, with predicate symbol made up of
$Prefix$ prepended to the
predicate symbol of $Reln$, and taking as arguments the arguments of $Reln$
together with $Newargs$.
For example,
\begin{quote}
?-- new\_lit(`ex\_tru\_`,reln(a,b,c),[T,A,B],N).
\end{quote}
yields
\begin{quote}
N = ex\_tru\_reln(a,b,c,T,A,B)
\end{quote}
The procedure is defined as follows\footnote{The verbatim code
is the actual implementation code given in standard Edinburgh notation.
I assume that the reader is familiar with such notation.}:
\index{new\_lit}
\index{add\_prefix}
\begin{verbatim} */
new_lit(_Prefix, Reln, _NewArgs, NewReln) :- is_thbuiltin(Reln),!,NewReln=Reln.
new_lit(Prefix, Reln, NewArgs, NewReln) :-
Reln =.. [Pred | Args],
add_prefix(Prefix,Pred,NewPred),
append(Args, NewArgs, AllArgs),
NewReln =.. [NewPred | AllArgs].
add_prefix(Prefix,Pred,NewPred) :-
string_codes(Prefix,PrefixC),
name(Pred,PredName),
append(PrefixC, PredName, NewPredName),
name(NewPred,NewPredName).
/* \end{verbatim}
\subsection{Compiling Rules}
The next simplest compilation form we consider is the intermediate form
called a ``rule''.
Rules are statements of how to conclude
the value of some relation. Each Theorist fact corresponds to a number
of rules (one for each literal in the fact).
Each rule gets translated into Prolog rules to explain
and prove the head of the rule.
Rules use the intermediate form called a ``literal''.
A literal is either an atomic symbol or of the form $n(A)$ where $A$ is
an atomic symbol.
A rules is either a literal or
of the form {\em H $\leftarrow$ Body} (written ``{\tt if(H,Body)}'')
where $H$ is a literal
and $Body$ is a conjunction and disjunction of literals.
We translate rules of the form
\[h(-x-) \leftarrow b_1(-x_1-), b_2(-x_2-), ... ,b_N(-x_n-);\]
into the internal form (assuming that $h$ is not negated)
\begin{prolog}
$ex\_tru\_h(-x-,ths(T_0,T_n,D_0,D_n), anc(P,N), ans(A_0,A_n)) $\IF
$ex\_tru\_b_1(-x_1-,ths(T_0,T_1,D_0,D_1), anc([h(-x-)|P],N), ans(A_0,A_1))$\AND
$ex\_tru\_b_2(-x_2-,ths(T_1,T_2,D_1,D_2), anc([h(-x-)|P],N), ans(A_1,A_2))$\AND
$...$\AND
$ex\_tru\_b_n(-x_n-,ths(T_{n-1},T_n,D_{n-1},D_n), anc([h(-x-)|P],N),
ans(A_{n-1},A_n)).$
\end{prolog}
That is, we explain $h$ if we explain each of the $b_i$,
accumulating the explanations and the answers.
Note that if $h$ is negated, then the head of the clause will be of
the form $ex\_not\_h$, and the ancestor form will be
$anc(P,[h(-x-)|N])$. If any of the $b_i$ are negated, then the
corresponding predicate will be $ex\_not\_b_i$.
\begin{example}\em
the rule
\begin{quote}
$gr(X,Y) \leftarrow f(X,Z), p(Z,Y)$
\end{quote}
gets translated into
\begin{prolog}
$ex\_tru\_gr(X,Y,ths(D,E,F,G),anc(H,I),ans(J,K))$\IF
$ex\_tru\_f(X,Z,ths(D,M,F,N),anc([gr(X,Y)|H],I),ans(J,O))$\AND
$ex\_tru\_p(Z,Y,ths(M,E,N,G),anc([gr(X,Y)|H],I),ans(O,K)).$
\end{prolog}
To explain $gr$ we explain both $f$ and $p$.
The initial assumptions for $f$ should be the initial assumptions for
$gr$, and the initial assumptions for $p$ should be the initial assumptions
plus those made to explain $f$. The resulting assumptions after proving $p$ are
are the assumptions made in explaining $gr$.
\end{example}
\begin{example} \em the fact
\begin{quote}
$father(randy,jodi)$
\end{quote}
gets translated into
\begin{quote}
$ex\_tru\_father(randy,jodi,ths(T,T,D,D),\_,ans(A,A)).$
\end{quote}
We can explain $father(randy,jodi)$ independently of the ancestors;
we need no extra assumptions, and we create no extra answers.
\end{example}
Similarly we translate rules of the form
\[h(-x-) \leftarrow b_1(-x_1-), b_2(-x_2-), ... ,b_N(-x_n-);\]
into
\begin{prolog}
$prv\_tru\_h(-x-, T, anc(P,N))$\IF
$prv\_tru\_b_1(-x_1-,T,anc([h(-x-)|P],N))$\AND
$...$\AND
$prv\_tru\_b_n(-x_n-,T,anc([h(-x-)|P],N)).$
\end{prolog}
\begin{example} \em the rule
\begin{quote}
$gr(X,Y) \leftarrow f(X,Z), p(Z,Y)$
\end{quote}
gets translated into
\begin{prolog}
$prv\_tru\_gr(X,Y,D,anc(H,I))$\IF
$prv\_tru\_f(X,Z,D,anc([gr(X,Y)|H],I))$\AND
$prv\_tru\_p(Z,Y,D,anc([gr(X,Y)|H],I)).$
\end{prolog}
That is, we can prove $gr$ if we can prove $f$ and $p$.
Having $gr(X,Y)$ in the ancestors means that we can prove $gr(X,Y)$
by assuming that $\neg gr(X,Y)$ and then proving $gr(X,Y)$.
\end{example}
\begin{example} \em the fact
\begin{quote}
$father(randy,jodi)$
\end{quote}
gets translated into
\begin{quote}
$prv\_tru\_father(randy,jodi,\_,\_).$
\end{quote}
Thus we can prove $father(randy,jodi)$ for any explanation and
for any ancestors.
\end{example}
Disjuncts in the source body (;) get mapped into Prolog's disjunction.
The answers and assumed hypotheses should be accumulated from
whichever branch was taken.
This is then executed without mapping out subterms.
\begin{example} \em
The rule
\begin{quote}
$p(A) \leftarrow q(A),(r(A),s(A);t(A)),m(A).$
\end{quote}
gets translated into
\begin{tabbing}\hbox{2cm}\=\hbox{1cm}\=\kill
$prv\_tru\_p(A,B,anc(C,D)):-$\\
\>$prv\_tru\_q(A,B,anc([p(A)|C],D)),$\\
\>(\>$prv\_tru\_r(A,B,anc([p(A)|C],D)),$\\
\>\>$prv\_tru\_s(A,B,anc([p(A)|C],D))$\\
\>;\>$prv\_tru\_t(A,B,anc([p(A)|C],D))),$\\
\>$prv\_tru\_m(A,B,anc([p(A)|C],D)).$\\\\
$ex\_tru\_p(A,ths(B,C,D,E),anc(F,G),ans(H,I)):-$\\
\>$ex\_tru\_q(A,ths(B,J,D,K),anc([p(A)|F],G),ans(H,L)),$\\
\>(\>$ex\_tru\_r(A,ths(J,M,K,N),anc([p(A)|F],G),ans(L,O)),$\\
\>\>$ex\_tru\_s(A,ths(M,P,N,Q),anc([p(A)|F],G),ans(O,R))$\\
\>;\>$ex\_tru\_t(A,ths(J,P,K,Q),anc([p(A)|F],G),ans(L,R))),$\\
\>$ex\_tru\_m(A,ths(P,C,Q,E),anc([p(A)|F],G),ans(R,I))$
\end{tabbing}
Note that $P$ is the resulting explanation from either executing
$r$ and $s$ or executing $t$ from the explanation $J$.
\end{example}
\subsubsection{The Code to Compile Rules}
The following relation builds the desired structure for the bodies:
\[make\_bodies(B,T,[Ths,Anc,Ans],ProveB,ExB)\]
where $B$ is a disjunct/conjunct of literals (the body
of the rule), $T$ is a theory for the proving,
$Ths$ is a theory structure for explaining,
$Anc$ is an ancestor
structure (of form $anc(P,N)$), $Ans$ is an answer structure
(of form $ans(A0,A1)$). This procedure
makes $ProveB$ the body of forms $prv\_tru\_b_i$ (and $prv\_not\_b_i$),
and $ExB$ a body of the forms $ex\_tru\_b_i$.
\index{make\_bodies}
\begin{verbatim} */
make_bodies(CoA,(H,B), T, [ths(T1,T3,D1,D3), Anc, ans(A1,A3)],
(ProveH,ProveB), (ExH,ExB)) :-
!,
make_bodies(CoA,H,T,[ths(T1,T2,D1,D2),Anc,ans(A1,A2)],ProveH,ExH),
make_bodies(CoA,B,T,[ths(T2,T3,D2,D3),Anc,ans(A2,A3)],ProveB,ExB).
make_bodies(CoA,(H;B),T,Ths,(ProveH;ProveB),(ExH;ExB)) :-
!,
make_bodies(CoA,H,T,Ths,ProveH,ExH),
make_bodies(CoA,B,T,Ths,ProveB,ExB).
make_bodies(callable,n(Builtin),_,[ths(T,T,D,D),_,ans(A,A)], \+ Builtin, \+ Builtin) :- is_thbuiltin(Builtin),!.
make_bodies(_CoA,n(A), T, [Ths,Anc,Ans], ProveA, ExA) :-
!,
new_lit(`prv_not_`, A, [T,Anc], ProveA),
new_lit(`ex_not_`, A, [Ths,Anc,Ans], ExA).
make_bodies(_CoA,Builtin,_,[ths(T,T,D,D),_,ans(A,A)],Builtin,Builtin) :- is_thbuiltin(Builtin),!.
make_bodies(_CoA,A, T, [Ths,Anc,Ans], ProveA, ExA) :- !,
new_lit(`prv_tru_`, A, [T,Anc], ProveA),
new_lit(`ex_tru_`, A, [Ths,Anc,Ans], ExA).
:- dynamic(declared_as_prolog/1).
is_thbuiltin(V):- var(V),fail.
is_thbuiltin(true).
is_thbuiltin(unif(_,_)).
is_thbuiltin( \+ (_)).
is_thbuiltin(call(_)).
is_thbuiltin('{}'(_)).
is_thbuiltin(G):-declared_as_prolog(G).
/* \end{verbatim}
The procedure $rule(F,R)$ declares $R$ to be a fact
or constraint rule (depending on the value of $F$).
Constraints can only be used for proving;
facts can be used for explaining as well as proving.
$R$ is either a literal or of the form $if(H,B)$ where $H$ is a literal
and $B$ is a body.
This $rule$ first checks to see whether we want sound unification and
then uses $drule(F,R)$ to decare the rule.
$prolog\_cl(C)$ is a way of asserting to Prolog the clause $C$.
This can either be asserted or written to a file to be consulted
or compiled. The simplest form is to just assert $C$.
$make\_anc(H)$ is a procedure which ensures that the ancestor search
is set up properly for $H$. It is described in section \ref{anc-section},
and can be ignored on first reading.
\index{rule}
\index{drule}
\begin{verbatim} */
drule(X):- default(X).
rule(F,R) :-
flagth((sound_unification,on)),!,
make_sound(R,S),
drule(F,S).
rule(F,R) :-
drule(F,R).
drule(F,if(H,B)) :-
!,
make_anc(H),
make_bodies(assertable,H,T,[Ths,Anc,Ans],ProveH,ExH),
form_anc(H,Anc,Newanc),
make_bodies(callable,B,T,[Ths,Newanc,Ans],ProveB,ExB),
prolog_cl((ProveH:-ProveB)),
( F= (fact),
prolog_cl((ExH:-ExB))
; F= (constraint)).
drule(F,H) :-
make_anc(H),
make_bodies(assertable,H,T,[ths(T,T,D,D),_,ans(A,A)],ProveH,ExH),
prolog_cl(ProveH),
( F= 'fact' -> prolog_cl(ExH) ; F='constraint').
/* \end{verbatim}
$form\_anc(L,A1,A2)$ means that $A2$ is the ancestor form for
subgoal $L$ with previous ancestor form $A1$.
\index{form\_anc}
\begin{verbatim} */
form_anc(n(G), anc(P,N), anc(P,[G|N])) :- !.
form_anc(G, anc(P,N), anc([G|P],N)).
/* \end{verbatim}
\subsection{Forming Contrapositives}
For both facts and constraints we convert the user
syntax into negation normal
form (section \ref{nnf}), form the contrapositives,
and declare these as rules.
Note that here we choose an arbitrary ordering for the clauses
in the bodies of the contrapositive forms of the facts. No
attempt has been made to optimise this, although it is noted that some
orderings are more efficient than others (see for example \cite{smith86}
for a discussion of such issues).
The declarations are as follows:
\index{declare\_fact}
\index{declare\_constraint}
\begin{verbatim} */
declare_fact(F) :-
nnf(F,even,N),
%wdmsgl(nnf=N),
rulify(fact,N).
declare_constraint(C) :-
nnf(C,even,N),
% wdmsgl(cnnf=N),
rulify(constraint,N).
/* \end{verbatim}
{\em nnf\/$($Wff,Parity,Nnf\/$)$} (section \ref{nnf})
means that {\em Nnf\/} is the negation normal form
of {\em Wff} if {\em Parity=even} and of $\neg${\em Wff}
if {\em Parity=odd}. Note that we {\em rulify} the normal form
of the negation of the formula.
{\em rulify\/}$(H,N)$ where $H$ is
either ``{\em fact\/}'' or ``{\em constraint\/}''
and $N$ is the negation of a fact or constraint
in negation normal form (see section \ref{nnf}),
means that all rules which can be formed from $N$ (by allowing each
atom in $N$ being the head of some rule) should be declared as such.
\index{rulify}
\begin{verbatim} */
rulify(H,(A,B)) :- !,
contrapos(H,B,A),
contrapos(H,A,B).
rulify(H,(A;B)) :- !,
rulify(H,A),
rulify(H,B).
rulify(H,n(A)) :- !,
rule(H,A).
rulify(H,A) :-
rule(H,n(A)).
/* \end{verbatim}
$contrapos(H,D,T)$ where $H$ is either ``{\em fact\/}''
or ``{\em constraint\/}'', and $(D,T)$ is (the negation of)
a formula in negation normal form means that all rules
which can be formed from $(D,T)$ with head of the rule coming from $T$
should be formed.
Think of $D$ as the literals for which the rules with them as heads
have been formed, and $T$ as those which remain to be as the head of
some rule.
\index{contrapos}
\begin{verbatim} */
contrapos(H,D, (L,R)) :- !,
contrapos(H,(R,D),L),
contrapos(H,(L,D),R).
contrapos(H,D,(L;R)) :- !,
contrapos(H,D,L),
contrapos(H,D,R).
contrapos(H,D,n(A)) :- !,
rule(H,if(A,D)).
contrapos(H,D,A) :-
rule(H,if(n(A),D)).
/* \end{verbatim}
\begin{example} \em
if we are to {\em rulify} the negation normal form
\begin{quote}
$n(p(A)),q(A),(r(A),s(A);t(A)),m(A)$
\end{quote}
we generate the following rule forms, which can then be given to {\em rule}
\begin{quote}
$p(A)\leftarrow q(A),(r(A),s(A);t(A)),m(A)$\\
$n(q(A))\leftarrow (r(A),s(A);t(A)),m(A),n(p(A))$\\
$n(r(A))\leftarrow s(A),m(A),q(A),n(p(A))$\\
$n(s(A))\leftarrow r(A),m(A),q(A),n(p(A))$\\
$n(t(A))\leftarrow m(A),q(A),n(p(A))$\\
$n(m(A))\leftarrow (r(A),s(A);t(A)),q(A),n(p(A))$
\end{quote}
\end{example}
\subsection{Sound Unification}
Sound unification works, by checking for repeated variables in the left
hand side of a rule, and then unifies them by hand. This idea was stolen from
Stickel's implementation.
\index{make\_sound}
\index{rms}
\begin{verbatim} */
make_sound(if(H,B),if(NH,NB)) :- !,
rms(H,NH,[],_,B,NB).
make_sound(H,NR) :-
rms(H,NH,[],_,true,NB),
(NB=true,NR=H;
NR=if(NH,NB)),!.
rms(V,V1,L,L,B,(unif(V,V1),B)) :-
var(V),
id_member(V,L),!.
rms(V,V,L,[V|L],B,B) :-
var(V),!.
rms([H|T],[H1|T1],L1,L3,B1,B3) :- !,
rms(H,H1,L1,L2,B1,B2),
rms(T,T1,L2,L3,B2,B3).
rms(A,A,L,L,B,B) :-
atomic(A),!.
rms(S,S2,L1,L2,B1,B2) :-
S =.. L,
rms(L,LR,L1,L2,B1,B2),
S2 =.. LR.
/* \end{verbatim}
\index{unif}
\index{appears\_in}
\begin{verbatim} */
unif(X,Y) :- unify_with_occurs_check(X,Y).
/*
unif(X,Y) :-
var(X), var(Y), X=Y,!.
unif(X,Y) :-
var(X),!,
\+ appears_in(X,Y),
X=Y.
unif(X,Y) :-
var(Y),!,
\+ appears_in(Y,X),
X=Y.
unif(X,Y) :-
atomic(X),!,X=Y.
unif([H1|T1],[H2|T2]) :- !,
unif(H1,H2),
unif(T1,T2).
unif(X,Y) :-
\+ atomic(Y),
X=..XS,
Y=..YS,
unif(XS,YS).
appears_in(X,Y) :-
var(Y),!,X==Y.
appears_in(X,[H|T]) :- !,
(appears_in(X,H); appears_in(X,T)).
appears_in(X,S) :-
\+ atomic(S),
S =.. L,
appears_in(X,L).
*/
/* \end{verbatim}
\subsection{Possible Hypotheses}
The other class of things we have to worry about is the class
of possible hypotheses. As described in \cite{poole:lf}
and outlined in section \ref{theorist},
we only need worry about atomic possible hypotheses.
If $d(-args-)$ is a possible hypothesis (default),
then we want to form the target code as follows:
\begin{enumerate}
\item We can only prove a hypothesis if we have already assumed it:
\begin{prolog}
$prv\_tru\_d(-args-,Ths,Anc) $\IF
$member(d(-args-),Ths).$
\end{prolog}
\item We can explain a default if we have already assumed it:
\begin{prolog}
$ex\_tru\_d(-args-,ths(T,T,D,D),Anc,ans(A,A)) $\IF
$member(d(-args-),T).$
\end{prolog}
\item We can explain a hypothesis by assuming it,
if it has no free variables, we have not
already assumed it and it is consistent with everything assumed before:
\begin{prolog} \em
$ex\_tru\_d(-args-,ths(T,[d(-args-)|T],D,D),Anc,ans(A,A)) $\IF
variable\_free$(d(-args-))$\AND
$\backslash+(member(d(-args-),T))$\AND
$\backslash+(prv\_not\_d(-args-,[d(-args-)|T],anc([],[]))).$
\end{prolog}
\item
If a hypothesis has free variables, it can be explained
by adding it to the deferred defaults list (making no assumptions about
its consistency; this will be checked at the end of the explanation phase):
\begin{prolog}
$ex\_tru\_d(-args-,ths(T,T,D,[d(-args-)|D],Anc,ans(A,A)) $\IF
$\backslash+($variable\_free$(d(-args-))).$
\end{prolog}
\end{enumerate}
The following compiles directly into such code:
\index{declare\_default}
\begin{verbatim} )*/
declare_default(D) :-
make_anc(D),
new_lit(`prv_tru_`,D,[T,_],Pr_D),
prolog_cl((Pr_D :- member(D,T))),
new_lit(`ex_tru_`,D, [ths(T,T,Defer,Defer), _, ans(A,A)], ExD),
prolog_cl((ExD :- member(D, T))),
new_lit(`ex_tru_`,D, [ths(T,[D|T],Defer,Defer), _, ans(A,A)], ExDass),
new_lit(`prv_not_`,D, [[D|T],anc([],[])],Pr_not_D),
prolog_cl((ExDass :- variable_free(D), \+member(D,T),
\+Pr_not_D)),
new_lit(`ex_tru_`,D, [ths(T,T,Defer,[D|Defer]), _, ans(A,A)], ExDefer),
prolog_cl((ExDefer :- \+ variable_free(D))).
/* \end{verbatim}
\begin{example}\em
The default
\begin{quote} \em
birdsfly$(A)$
\end{quote}
gets translated into \em
\begin{prolog}
prv\_tru\_birdsfly$(A,B,C):-$\\
\>member$(\hbox{birdsfly}(A),B)$\\
ex\_tru\_birdsfly$(A,ths(B,B,C,C),D,ans(E,E)):-$\\
\>member$(\hbox{birdsfly}(A),B)$\\
ex\_tru\_birdsfly$(A,ths(B,[\hbox{birdsfly}(A)|B],C,C),D,ans(E,E)):-$\\
\>variable\_free$(\hbox{birdsfly}(A)) ,$\\
\>$\backslash+$member$(\hbox{birdsfly}(A),B),$\\
\>$\backslash+$prv\_not\_birdsfly$(A,[\hbox{birdsfly}(A)|B],anc([],[]))$\\
ex\_tru\_birdsfly$(A,ths(B,B,C,[\hbox{birdsfly}(A)|C]),D,ans(E,E)):- $\\
\>$\backslash+$variable\_free$(\hbox{birdsfly}( A))$
\end{prolog}
\end{example}
\subsection{Relations defined in Prolog}
We can define some relations to be executed in Prolog.
This means that we can prove the $prove$ and $ex$ forms by calling
the appropriate Prolog definition.
\index{declare\_prolog}
\begin{verbatim} */
declare_prolog(G) :- declared_as_prolog(G),!.
declare_prolog(G) :-
prolog_cl(declared_as_prolog(G)),
new_lit(`ex_tru_`,G, [ths(T,T,D,D), _, ans(A,A)], ExG),
prolog_cl((ExG :- G)),
new_lit(`prv_tru_`,G,[_,_],PrG),
prolog_cl((PrG :- G)),!.
/* \end{verbatim}
\subsection{Explaining Observations}
$expl(G,T0,T1,A)$ means that $T1$ is an explanation of $G$ or $A$ ($A$ being
the alternate answers) from the facts given $T0$ is already assumed.
$G$ is an arbitrary wff.
\index{expl}
\begin{verbatim} */
expl(G,T0,T1,Ans) :-
make_ground(N),
once(declare_fact('<-'(newans(N,G) , G))),
ex_tru_newans(N,G,ths(T0,T,[],D),anc([],[]),ans([],Ans)),
make_ground(D),
check_consis(D,T,T1).
/* \end{verbatim}
\index{check\_consis}
\begin{verbatim} */
check_consis([],T,T).
check_consis([H|D],T1,T) :-
new_lit(`prv_not_`,H, [T1,anc([],[])], Pr_n_H),
\+ Pr_n_H,
check_consis(D,[H|T1],T).
/* \end{verbatim}
To obtain disjunctive answers we have to know if the negation of the top
level goal is called. This is done by declaring the fact
$newans(G) \leftarrow G$, and if we ever try to
prove the negation of a top level goal, we add that instance to the
list of alternate answers. In this implementation we also check
that $G$ is not identical to a higher level goal. This removes most cases
where we have a redundant assumption (i.e., when we are not gaining a new
answer, but only adding redundant information).
\index{ex\_not\_newans}
\index{id\_anc}
\begin{verbatim} */
:- dynamic ex_not_newans/5.
:- dynamic ex_tru_newans/5.
:- dynamic prv_not_newans/4.
ex_not_newans(N,G,ths(T,T,D,D),anc(Pos,Neg),ans(A,[G|A])) :-
member(newans(N,_),Pos),
\+ id_anc(G,anc(Pos,Neg)).
id_anc(n(G),anc(_,N)) :- !, id_member(G,N).
id_anc(G,anc(P,_)) :- id_member(G,P).
/* \end{verbatim}
\subsection{Ancestor Search} \label{anc-section}
Our linear resolution
theorem prover must recognise that a goal has been proven if
it unifies with an ancestor in the search tree. To do this, it keeps
two lists of ancestors, one containing the positive (non negated)
ancestors and the other the negated ancestors.
When the ancestor search rules for predicate $p$ are defined, we assert
{\em ancestor\_recorded(p)}, so that we do not attempt to redefine the
ancestor search rules.
\index{make\_ex\_tru\_anc}
\index{flagth,ancestor\_search}
\index{flagth,loop\_check}
\begin{verbatim} */
:- dynamic ancestor_recorded/1.
ancestor_recorded(P):-is_thbuiltin(P).
make_anc(_) :-
flagth((ancestor_search,off)),
flagth((loop_check,off)),
flagth((depth_bound,off)),
!.
make_anc(Name) :-
ancestor_recorded(Name),
!.
make_anc(n(Goal)) :-
!,
make_anc(Goal).
make_anc(Goal) :-
Goal =.. [Pred|Args],
same_length(Args,Nargs),
NG =.. [Pred|Nargs],
make_bodies(assertable,NG,_,[ths(T,T,D,D),anc(P,N),ans(A,A)],ProveG,ExG),
make_bodies(assertable,n(NG),_,[ths(T,T,D,D),anc(P,N),ans(A,A)],ProvenG,ExnG),
( flagth((loop_check,off))
;
prolog_cl((ProveG :- id_member(NG,P),!,fail)),
prolog_cl((ProvenG :- id_member(NG,N),!,fail)),
prolog_cl((ExG :- id_member(NG,P),!,fail)),
prolog_cl((ExnG :- id_member(NG,N),!,fail))
),
( flagth((ancestor_search,off))
;
prolog_cl((ProveG :- member(NG,N))),
prolog_cl((ProvenG :- member(NG,P))),
prolog_cl((ExG :- member(NG,N))),
prolog_cl((ExnG :- member(NG,P)))
),
( flagth((depth_bound,off)), !
;
prolog_cl((ProveG :- (flagth((depth_bound,MD))),
number(MD),length(P,LP),length(N,LN),LP+LN>MD,!,fail)),
prolog_cl((ProvenG :- (flagth((depth_bound,MD))),
number(MD),length(P,LP),length(N,LN),LP+LN>MD,!,fail)),
prolog_cl((ExG :- (flagth((depth_bound,MD))),
number(MD),length(P,LP),length(N,LN),LP+LN>MD,!,fail)),
prolog_cl((ExnG :- (flagth((depth_bound,MD))),
number(MD),length(P,LP),length(N,LN),LP+LN>MD,!,fail))
),
assert(ancestor_recorded(NG)),
!.
/* \end{verbatim}
\begin{example} \em
If we do a call
\begin{quote}
make\_anc(gr(A,B))
\end{quote}
we create the Prolog clauses
\begin{prolog}
prv\_tru\_gr(A,B,C,anc(D,E))\IF
member(gr(A,B),E).\\
prv\_not\_gr(A,B,C,anc(D,E))\IF
member(gr(A,B),D).\\
ex\_tru\_gr(A,B,ths(C,C,D,D),anc(E,F),ans(G,G))\IF
member(gr(A,B),F).\\
ex\_not\_gr(A,B,ths(C,C,D,D),anc(E,F),ans(G,G))\IF
member(gr(A,B),E).
\end{prolog}
This is only done once for the $gr$ relation.
\end{example}
\section{Interface}
In this section a minimal interface is given. We try to give
enough so that we can understand the conversion of the wff form
into negation normal form and
the parsing of facts and defaults. There is, of course,
much more in any usable interface than described here.
\subsection{Syntax Declarations}
All of the declarations we use will be defined as operators.
This will allow us to use infix forms of our wffs, for extra readability.
Here we use the standard Edinburgh operator declarations which are
given in the spirit of being enough to make the rest of the description
self contained.
\begin{verbatim} */
:- dynamic((flagth)/1).
:- op(1150,fx,'drule').
:- op(1150,fx,'default').
:- op(1150,fx,'fact').
:- op(1150,fx,constraint).
:- op(1150,fx,prolog).
:- op(1150,fx,explain).
:- op(1150,fx,predict).
:- op(1150,fx,define).
:- op(1150,fx,set).
:- op(1150,fx,flagth).
:- op(1150,fx,reset).
:- op(1150,fy,h).
:- op(1150,fx,thconsult).
:- op(1150,fx,thtrans).
:- op(1150,fx,thcompile).
:- op(1130,xfx,:).
:- op(1120,xfx,==).
:- op(1120,xfx,<=>).
:- op(1120,xfx,equiv).
:- op(1110,xfx,<-).
:- op(1110,xfx,=>).
:- op(1100,xfy,or).
:- op(1000,xfy,and).
:- op(1000,xfy,&).
:- op(950,fy,~).
:- op(950,fy,not).
/* \end{verbatim}
\subsection{Converting to Negation Normal Form} \label{nnf}
We want to convert an arbitrarily complex formula into a standard form
called {\em negation normal form\/}. Negation normal form of a formula is
an equivalent formula consisting of conjunctions and disjunctions of
literals (either an atom or of the form $n(A)$ where $A$ is an atom).
The relation defined here puts formulae into negation normal form
without mapping out subterms.
Usually we want to find the negation normal form of the negation of the
formula, as this is the form suitable for use in the body of a rule.
The predicate used is of the form
\[nnf(Fla,Parity,Body)\]
where
\begin{description}
\item[$Fla$] is a formula with input syntax
\item[$Parity$] is either $odd$ or $even$ and denotes whether $Fla$ is
in the context of an odd or even number of negations.
\item[$Body$] is a tuple which represents the negation normal form
of the negation of $Fla$
if parity is even and the negation normal form of $Fla$ if parity is odd.
\end{description}
\index{nnf}
\begin{verbatim} */
nnf(equiv(X , Y), P,B) :- !,
nnf(((Y or not X) and (X or not Y)),P,B).
nnf((X == Y), P,B) :- compound(X), compound(Y), !, nnf(equiv(X , Y), P,B).
nnf('<=>'(X , Y), P,B) :- !, nnf(equiv(X , Y), P,B).
nnf(all(_, Y), P,B) :- !,nnf(Y, P,B).
nnf(exists(E, Y), P, exists(E, B)) :- !,nnf(Y, P,B).
nnf(if(X , Y), P,B) :- !,
nnf((Y or not X),P,B).
nnf(=>(X,Y), P,B) :- !, nnf(if(X , Y), P,B).
nnf(->(X,Y), P,B) :- !, nnf(if(X , Y), P,B).
nnf((Y <- X), P,B) :- !,
nnf((Y or not X),P,B).
nnf(^(X, Y), P,B) :- !, nnf(and(X, Y),P,B).
nnf((X & Y), P,B) :- !, nnf(and(X, Y),P,B).
nnf((X , Y), P,B) :- !, nnf(and(X, Y),P,B).
nnf(and(X, Y),P,B) :- !,
opposite_parity(P,OP),
nnf((not X or not Y),OP,B).
nnf((X | Y), P,B) :- !, nnf(xor(X,Y),P,B).
nnf(xor(X, Y), P,B) :- !, nnf(or(and(not(X),Y),and(X,not(Y))),P,B).
nnf((X ; Y), P,B) :- !, nnf(or(X,Y),P,B).
nnf(v(X, Y), P,B) :- !, nnf(or(X,Y),P,B).
nnf(or(X,Y),even,(XB,YB)) :- !,
nnf(X,even,XB),
nnf(Y,even,YB).
nnf(or(X,Y),odd,(XB;YB)) :- !,
nnf(X,odd,XB),
nnf(Y,odd,YB).
nnf((~ X),P,B) :- !,
nnf((not X),P,B).
nnf((not X),P,B) :- !,
opposite_parity(P,OP),
nnf(X,OP,B).
nnf(F,odd,FF):- xlit(F,FF).
nnf(n(F),even,FF) :- !,xlit(F,FF).
nnf(F,even,n(FF)):- xlit(F,FF).
xlit(F,F):- \+ compound(F).
xlit({X},{X}).
xlit(=(A,B),sameObjects(A,B)).
xlit(neq(A,B),{dif(A,B)}).
xlit([F|Args],OUT):- maplist(xlit,[F|Args],OUT).
xlit(P,PP):- P=..[F|Args],maplist(xlit,Args,FArgs),PP=..[F|FArgs].
/* \end{verbatim}
\index{opposite\_parity}
\begin{verbatim} */
opposite_parity(even,odd).
opposite_parity(odd,even).
/* \end{verbatim}
\begin{example} \em
the wff
\begin{quote} \em
(a or not b) and c $\Rightarrow$ d and (not e or f)
\end{quote}
with parity {\em odd} gets translated into
\begin{quote}
$d,(e;f);n(a),b;n(c) $
\end{quote}
the same wff with parity {\em even} (i.e., the negation of the wff)
has negation normal form:
\begin{quote}
$(n(d);e,n(f)),(a;n(b)),c$
\end{quote}
\end{example}
\subsection{Theorist Declarations}
The following define the Theorist declarations.
Essentially these operators just call the appropriate compiler
instruction. These commands cannot be undone by doing a retry to them;
the compiler assertions will be undone on backtracking.
\index{fact}
\begin{verbatim} */
fact(F) :- declare_fact(F),!.
/* \end{verbatim}
The $default$ declaration makes the appropriate equivalences between the
named defaults and the unnamed defaults.
\index{default}
\begin{verbatim} */
default((N : H)):-
!,
declare_default(N),
declare_fact((H <-N)),
!.
default( N ):-
declare_default(N),
!.
/* \end{verbatim}
\index{default}
\begin{verbatim} */
constraint((C)) :-
declare_constraint(C),
!.
/* \end{verbatim}
The $prolog$ command says that the atom $G$ should be proven in the
Prolog system. The argument of the $define$ statement is a Prolog
definition which should be asserted (N.B. that it should be in
parentheses if it contains a ``{\tt :-}''.
\index{prolog}
\begin{verbatim}
)
*/
prolog(( G )) :-
declare_prolog(G).
/* \end{verbatim}
\index{define}
\begin{verbatim} */
define( G ):-
prolog_cl(G).
/* \end{verbatim}
The $explain$ command keeps writing out all of the explanations found.
This is done by finding one, writing the answer, and then retrying so that
the next answer is found. This is done so that the computation is left in
an appropriate state at the end of the computation.
\index{explain}
\begin{verbatim} */
explain G :- ignore((explain_goal(G)*->fail;(format('~nUntrue: ~p.~n',[G]),forall(explain_goal(~G),true)))).
explain_goal(G) :-
(flagth((timing,on))),!,
statistics(runtime,_),
expl(G,[],D,A),
statistics(runtime,[_,Time]),
writeans(G,D,A),
format('took ~3d sec.~n~n',[Time])
;
expl(G,[],D,A),
writeans(G,D,A).
/* \end{verbatim}
\index{writeans}
\index{writedisj}
\begin{verbatim} */
writeans(G,D,A) :-
format('~nAnswer is ~p', [G]),
writedisj(A),
format('~nTheory is ~p~n', [D]),
!.
writedisj([]).
writedisj([H|T]) :-
writedisj(T),
format(' or ~p',[H]).
/* \end{verbatim}
\subsection{Prediction}
In \cite{poole:lf} we present a sceptical view of prediction
argue that one should predict what is in every extension.
The following theorem proved in \cite{poole:lf} gives us a hint
as to how it should be implemented.
\begin{theorem} \label{everythm}
$g$ is not in every extension iff there exists a scenario $S$ such
that $g$ is not explainable from $S$.
\end{theorem}
The intuition is that
if $g$ is not in every extension then there is no reason to rule out
$S$ (based on the information given) and so we should not predict $g$.
We can use theorem \ref{everythm} to consider another way to view membership
in every extension. Consider two antagonistic agents $Y$ and $N$ trying to
determine whether $g$ should be predicted or not. $Y$ comes
up with explanations of $g$, and $N$ tries to find where these explanations
fall down (i.e., tries to find a scenario $S$ which is inconsistent with
all of $Y$''s explanations). $Y$ then tries to find an explanation of $g$
given $S$.
If $N$ cannot find a defeater for $Y$'s explanations then
$g$ is in every extension, and if $Y$ cannot find an explanation from
some $S$ constructed by $N$ then $g$ is not in every extension.
The following code implements this, but (as we cannot implement
coroutines as needed above in Prolog), it may generate more
explanations of the goal than is needed. What we really want is for the
first ``bagof'' to generate the explanations in a demand-driven fashion,
and then just print the explanations needed.
\index{predict}
\begin{verbatim} */
predict(( G )):-
bagof(E,expl(G,[],E,[]),Es),
predct(G,Es).
predct(G,Es) :-
simplify_expls(Es,SEs),
( find_counter(SEs,[],S),
!,
format('No, ~q is not explainable from ~q.~n',[G,S])
; format('Yes, ~q is in all extensions.~nExplanations are:~n',[G]),
list_scens(1,SEs)).
/* \end{verbatim}
\index{find\_counter}
\begin{verbatim} */
find_counter([],S,S).
find_counter([E|R],S0,S2) :-
member(D,E),
expl2not(D,S0,S1),
find_counter(R,S1,S2).
/* \end{verbatim}
\index{list\_scens}
\begin{verbatim} */
list_scens(_,[]).
list_scens(N,[H|T]) :-
format('~q: ~q.~n',[N,H]),
N1 is N+1,
list_scens(N1,T).
/* \end{verbatim}
$expl2not(G,T0,T1)$ is true if ground $\neg G$ is explainable starting from
scenario $T0$, with resulting explanation $T1$. No disjunctive answers are
formed.
\index{expl2}
\begin{verbatim} */
expl2not(G,T0,T1) :-
new_lit(`ex_not_`,G,[ths(T0,T,[],D),anc([],[]),ans([],[])],ExG),
ExG,
make_ground(D),
check_consis(D,T,T1).
/* \end{verbatim}
\subsection{Simplifying Explanations}
\index{simplify\_obs}
\begin{verbatim} */
simplify_expls([S],[S]).
simplify_expls([H|T], S) :-
simplify_expls(T, TS),
mergeinto(H,TS,S).
/* \end{verbatim}
\index{mergeinto}
\begin{verbatim} */
mergeinto(L,[],[L]).
mergeinto(L,[A|R],[A|R]) :-
instance_of(A,L),
!.
mergeinto(L,[A|R],N) :-
instance_of(L,A),
!,
mergeinto(L,R,N).
mergeinto(L,[A|R],[A|N]) :-
mergeinto(L,R,N).
/* \end{verbatim}
\index{instance\_of}
\begin{verbatim} */
instance_of(D,S) :-
remove_all(D,S,_).
/* \end{verbatim}
\subsection{File Handling}
To consult a Theorist file, you should do a,
\begin{verse}
{\bf thconsult} \em filename.
\end{verse}
The following is the definition of {\em thconsult}. Basicly we just
keep reading the file and executing the commands in it until we stop.
\index{thconsult}
\begin{verbatim} */
thconsult(( File0 )):-
fix_absolute_file_name(File0,File),
current_input(OldFile),
open(File,read,Input),
set_input(Input),
th_read(T),
read_all(T),!,
set_input(OldFile).
/* \end{verbatim}
\index{read\_all}
\begin{verbatim} */
:- meta_predicate(read_all(*)).
read_all(end_of_file) :- !.
read_all(T) :-
((flagth(( asserting,on))),!; format('~n% ~p.~n',[T])),
(thmust(T) *-> true ; format('% Warning: ~p failed~n',[T])),
th_read(T2),
read_all(T2).
th_read(T):- read_term(T,[module(snark_theorist),variable_names(Vs)/*,double_quotes(codes)*/]),b_setval('$variable_names',Vs).
thmust(G):- call(G),!.
thmust(G):- rtrace(G),!.
/* \end{verbatim}
{\em thtrans} is like the previous version, but the generated code is written
to a file. This code is neither loaded or compiled.
\index{thtrans}
\begin{verbatim} */
fix_absolute_file_name(I,O):- is_list(I),!,string_to_atom(I,A),absolute_file_name(A,O).
fix_absolute_file_name(I,O):- absolute_file_name(I,O),!.
fix_absolute_file_name(I,O):- I=O.
thtrans(( File0 )):-
fix_absolute_file_name(File0,File),
string_codes(File, Fname),
append(Fname,`.pl`,Plfname),
name(Plfile, Plfname),
current_output(Oldoutput),
open(Plfile,write,Output),
set_output(Output),
thtrans2out(File),
close(Output),
set_output(Oldoutput),!.
thtrans2out(File0):-
fix_absolute_file_name(File0,File),
current_input(Oldinput),
open(File,read,Input),
set_input(Input),
format(':- dynamic contrapos_recorded/1.~n',[]),
format(':- style_check(- singleton).~n',[]),
format(':- style_check(- discontiguous).~n',[]),
(setth((asserting,off))),
th_read(T),
read_all(T),
set_input(Oldinput),
resetth(( asserting)),!.
/* \end{verbatim}
To compile a Theorist file, you should do a,
\begin{verse}
{\bf thconsult} \em filename.
\end{verse}
This translates the code to Prolog and then compiles the prolog code.
{\em thcompile} translates the file to Prolog
which is then compiled using the Prolog compiler.
\index{thcompile}
\begin{verbatim} */
thcompile(( File )):-
(thtrans(( File))),
% no_style_check(all),
compile(File).
/* \end{verbatim}
\subsection{Flag Setting} \label{flags}
There are a number of Theorist options which can be set by flagth declarations.
Flags, by default, are {\tt on}.
To set the flagth $f$ to value $v$ you can issue the command
\begin{verse}
\bf set $f,v.$
\end{verse}
To find out the value of the flagth $f$ issue the command
\begin{verse}
\bf flagth $f,V.$
\end{verse}
You can reset the value of flagth $f$ to its old value by
\begin{verse}
\bf reset $f.$
\end{verse}
The list of all flags is given by the command
\begin{verse}
\bf flags.
\end{verse}
The following is the definition of these
\index{set}
\begin{verbatim} */
setth((F,V)):-
prolog_decl((flagth((F,V1)):- !,V=V1)),!.
/* \end{verbatim}
\index{flagth}
\begin{verbatim} */
flagth((_,on)).
/* \end{verbatim}
\index{reset}
\begin{verbatim} */
resetth(F) :-
retract((flagth((F,_)) :- !,_=_)).
/* \end{verbatim}
\index{flags}
\begin{verbatim} */
flags :- list_flags([asserting,ancestor_search,loop_check,
depth_bound,sound_unification,timing]).
list_flags([]).
list_flags([H|T]) :-
(flagth((H,V))),
format('flagth((~w,~w)).~n',[H,V]),
list_flags(T).
/* \end{verbatim}
\subsection{Compiler Directives}
There are some compiler directives which need to be added to Theorist
code so that the Prolog to assembly language compiler can work
(these are translated into the appropriate Quintus compiler directives).
So that the Quintus compiler can correctly compile the code,
we should declare that all calls for which we can assert the goal
or the negative are dynamic, this is done by the command
\begin{verse}
\bf dyn $n.$
\end{verse}
This need only be given in files,
and should be given before the atomic symbol $n$ is ever used.
The following gives the appropriate translation.
Essentially we then must say that the appropriate Prolog code is dynamic.
\index{explainable}
\begin{verbatim} */
:- op(1150,fx,(dyn)).
dyn(n(G)) :-
!,
(dyn(G)).
dyn(G):-
G =.. [R|Args],
add_prefix(`ex_not_`,R,ExNR),
add_prefix(`ex_tru_`,R,ExR),
length(Args,NA),
ExL is NA + 3,
decl_dyn(ExNR/ExL),
decl_dyn(ExR/ExL),
add_prefix(`prv_not_`,R,PrNR),
add_prefix(`prv_tru_`,R,PrR),
PrL is NA + 2,
decl_dyn(PrNR/PrL),
decl_dyn(PrR/PrL).
decl_dyn(F/A) :- (flagth((asserting, on))),!,dynamic(F/A).
decl_dyn(FA):- format(':- dynamic ~q.~n',[FA]).
:- op(1150,fx,explainable).
explainable G :- dyn G.
/* \end{verbatim}
\subsection{Using the Compiled Rules}
The use of conditional asserting (prolog\_cl) is twofold.
The first is to write the condition to a file if that is desired.
The second is to be a backtrackable assert otherwise.
\index{prolog\_cl}
\index{flagth,asserting}
\begin{verbatim} */
% if_dbg(_G):-true,!.
if_dbg(G):-call(G).
print_clause(C) :- portray_clause(C).
/*
print_clause(C) :-
\+ \+ (
tnumbervars(C,0,_),
writeq(C),
write('.'),
nl).
*/
%prolog_cl(({C}:-B)):- !, prolog_cl((C:-B)).
%prolog_cl({C}):- !, prolog_cl(C).
prolog_cl((C:-B)):- \+ \+ ( C = B),!.
prolog_cl(C) :-
flagth((asserting,off)),!,
print_clause(C),!.
prolog_cl(C) :-
(clause_asserted(C)->! ; (assertz(C),call(if_dbg(print_clause((C)))))),!.
prolog_cl(C) :-
if_dbg(print_clause(retract(C))),
break,retract(C),
fail.
/* \end{verbatim}
$prolog\_decl$ is like the above predicate, but is both
written to the file and asserted.
\index{prolog\_decl}
\begin{verbatim} */
prolog_decl(C) :-
flagth((asserting,off)),
print_clause(C),
fail.
prolog_decl(C) :-
asserta(C).
prolog_decl(C) :-
retract(C),
fail.
/* \end{verbatim}
\subsection{Saving Theorist}
The command ``save'' automagically saves the state of the Theorist code
as the command `theorist`. This is normally done straight after compiling this
file.
\index{save}
\begin{verbatim} */
save :-
call(call,quintus:save_program(th,
format('~nWelcome to THEORIST 1.1.1 (4 December 89 version)
For help type ``h.''.
Any Problems see David Poole (poole@cs.ubc.ca)~n',
[]))).
/* \end{verbatim}
\section{Utility Functions}
\subsection{List Predicates}
$append(X,Y,Z)$ is the normal append function
\index{append}
\begin{verbatim}
append([],L,L).
append([H|X],Y,[H|Z]) :-
append(X,Y,Z).
\end{verbatim}
\index{member}
\begin{verbatim} */
/*
member(A,[A|_]).
member(A,[_|R]) :-
member(A,R).
*/
/* \end{verbatim}
$id\_member(X,L)$ is true if $X$ is identical to some member of list $L$.
\index{id\_member}
\begin{verbatim} */
id_member(A,[B|_]) :-
A==B.
id_member(A,[_|R]) :-
id_member(A,R).
/* \end{verbatim}
\index{same\_length}
\begin{verbatim} */
same_length([],[]).
same_length([_|L1],[_|L2]) :-
same_length(L1,L2).
/* \end{verbatim}
\index{remove}
\begin{verbatim} */
remove(A,[A|B],B).
remove(A,[H|T],[H|R]) :-
remove(A,T,R).
/* \end{verbatim}
\index{remove\_all}
\begin{verbatim} */
remove_all([],L,L).
remove_all([H|T],L,L2) :-
remove(H,L,L1),
remove_all(T,L1,L2).
/* \end{verbatim}
\subsection{Looking at Terms}
\index{variable\_free}
\begin{verbatim} */
variable_free(X) :- !, \+ ground(X).
variable_free(X) :-
atomic(X),
!.
variable_free(X) :-
var(X),
!,
fail.
variable_free([H|T]) :-
!,
variable_free(H),
variable_free(T).
variable_free(X) :-
X =.. Y,
variable_free(Y).
/* \end{verbatim}
\index{make\_ground}
\begin{verbatim} */
make_ground(X) :-
retract(groundseed(N)),
tnumbervars(X,N,NN),
asserta(groundseed(NN)).
:- dynamic groundseed/1.
groundseed(26).
/* \end{verbatim}
\index{reverse}
\begin{verbatim} */
reverse([],T,T).
reverse([H|T],A,B) :-
reverse(T,A,[H|B]).
/* \end{verbatim}
\subsection{Help Commands}
\index{h}
\begin{verbatim} */
(h) :- format('This is Theorist 1.1 (all complaints to David Poole)
For more details issue the command:
h H.
where H is one of:~n',
[]),
unix(system('ls /faculty/poole/theorist/help')).
(h(( H))) :- !,
add_prefix(`more /faculty/poole/theorist/help/`,H,Cmd),
unix(system(Cmd)).
/* \end{verbatim}
\subsection{Runtime Considerations}
What is given here is the core part of our current implementation of
Theorist.
This code has been used with Waterloo Unix Prolog, Quintus Prolog,
C-prolog and Mac-Prolog.
For those Prologs with compilers we can actually compile the resulting
code from this translater as we could any other Prolog code;
this make it very fast indeed.
The resulting code when the Theorist code is of the form of definite clauses
(the only case where a comparison makes sense,
as it is what the two systems have in common), runs at about a quarter
the speed
of the corresponding interpreted or compiled code of the underlying
Prolog system. About half of this extra cost is
for the extra arguments to unify,
and the other factor is for one membership
of an empty list for each procedure call.
For each procedure call we do one extra Prolog call which immediately fails.
For the definite clause case, the contrapositive of the clauses are never used.
\section{Conclusion}
This paper has described in detail how we can translate Theorist code into
prolog so that we can use the advances in Prolog implementation Technology.
As far as this compiler is concerned there are a few issues which
arise:
\begin{itemize}
\item Is there a more efficient way to determine that a goal can succeed because
it unifies with an ancestor \cite{poole:grace,loveland87}?
\item Can we incorporate a cycle check that has a low overhead?
A simple, but expensive, version is implemented in some versions of
our compiler which checks for identical ancestors.
\item Are there optimal ordering which we can put the compiled
clauses in so that we get answer most quickly \cite{smith86}?
At the moment the compiler just puts the elements of the bodies
in an arbitrary ordering. The optimal ordering depends, of course,
on the underlying control structure.
\item Are there better ways to do the consistency checking when there are
variables in the hypotheses?
\end{itemize}
We are currently working on many applications of default and abductive
reasoning.
Hopefully with compilers based on the ideas presented in this paper
we will be able to take full advantage of
advances in Prolog implementation technology while still allowing
flexibility in specification of the problems to be solved.
\section*{Acknowledgements}
This work could not have been done without the ideas,
criticism and feedback from Randy Goebel, Eric Neufeld,
Paul Van Arragon, Scott Goodwin and Denis Gagn\'e.
Thanks to Brenda Parsons and Amar Shan for valuable comments on
a previous version of this paper.
This research was supported under NSERC grant A6260.
\begin{thebibliography}{McDer80}
\bibitem[Brewka86]{brewka86}
G.\ Brewka,
``Tweety -- Still Flying: Some Remarks on Abnormal Birds, Applicable Rules
and a Default Prover'',
{\em Proc.\ AAAI-86}, pp.\ 8-12.
\bibitem[Chang73]{chang}
C-L.\ Chang and R.\ C-T.\ Lee,
{\em Symbolic Logic and Mechanical Theorem Proving},
Academic Press, 1973.
\bibitem[Cox82]{cox82}
P.\ T.\ Cox, {\em Dependency-directed backtracking for Prolog Programs}.
\bibitem[Cox87]{cox87}
P.\ T.\ Cox and T.\ Pietrzykowski, {\em General Diagnosis by Abductive
Inference}, Technical report CS8701, School of Computer Science,
Technical University of Nova Scotia, April 1987.
\bibitem[Dincbas87]{dincbas}
M.~Dincbas, H.~Simonis and P.~Van Hentenryck,
{\em Solving Large Combinatorial Problems in Logic Programming\/},
ECRC Technical Report, TR-LP-21, June 1987.
\bibitem[Doyle79]{doyle79}
J.\ Doyle,
``A Truth Maintenance System'',
{\em Artificial Intelligence},
Vol.\ 12, pp 231-273.
\bibitem[de Kleer86]{dekleer86}
J.\ de Kleer,
``An Assumption-based TMS'',
{\em Artificial Intelligence, Vol.\ 28, No.\ 2}, pp.\ 127-162.
\bibitem[Edmonson87]{edmonson}
R.~Edmonson, ????
\bibitem[Enderton72]{enderton}
H.\ B.\ Enderton, {\em A Mathematical Introduction to Logic},
Academic Press, Orlando.
\bibitem[Genesereth87]{genesereth87}
M.\ Genesereth and N.\ Nilsson,
{\em Logical Foundations of Artificial Intelligence},
Morgan-Kaufmann, Los Altos, California.
\bibitem[Ginsberg87]{ginsberg87}
M.~L.~Ginsberg, {\em Computing Circumscription\/},
Stanford Logic Group Report Logic-87-8, June 1987.
\bibitem[Goebel87]{goebel87}
R.\ G.\ Goebel and S.\ D.\ Goodwin,
``Applying theory formation to the planning problem''
in F.\ M.\ Brown (Ed.),
{\em Proceedings of the 1987 Workshop on The Frame Problem in Artificial
Intelligence}, Morgan Kaufmann, pp.\ 207-232.
\bibitem[Kowalski79]{kowalski}
R.~Kowalski, ``Algorithm = Logic + Control'',
{\em Comm.~A.C.M.} Vol 22, No 7, pp.~424-436.
\bibitem[Lifschitz85]{lifschitz85}
V.~Lifschitz, ``Computing Circumscription'',
{\em Proc.~IJCAI85}, pp.~121-127.
\bibitem[Lloyd87]{lloyd}
J.~Lloyd, {\em Foundations of Logic Programming},
Springer-Verlag, 2nd Edition.
\bibitem[Loveland78]{loveland78}
D.~W.~Loveland, {\em Automated Theorem Proving: a logical basis},
North-Holland, Amsterdam.
\bibitem[Loveland87]{loveland87}
D.~W.~Loveland, ``Near-Horn Logic Programming'',
{\em Proc. 6th International Logic Programming Conference}.
\bibitem[McCarthy86]{mccarthy86}
J.\ McCarthy, ``Applications of Circumscription to Formalising
Common Sense Knowledge'', {\em Artificial Intelligence}, Vol.\ 28, No.\ 1,
pp.\ 89-116.
\bibitem[Moto-Oka84]{pie}
T.~Moto-Oka, H.~Tanaka, H.~Aida, k.~Hirata and T.~Maruyama,
``The Architecture of a Parallel Inference Engine --- PIE'',
{\em Proc.\ Int.\ Conf.\ on Fifth Generation Computing Systems},
pp.~479-488.
\bibitem[Naish86]{naish86}
L.~Naish, ``Negation and Quantifiers in NU-PROLOG'',
{\em Proc.~3rd Int.\ Conf.\ on Logic Programming},
Springer-Verlag, pp.~624-634.
\bibitem[Neufeld87]{neufeld87}
E.\ M.\ Neufeld and D.\ Poole,
``Towards solving the multiple extension problem:
combining defaults and probabilities'',
{\em Proc.\ Third AAAI Workshop on Reasoning with Uncertainty},
Seattle, pp.\ 305-312.
\bibitem[Poole84]{poole:clausal}
D.\ L.\ Poole,
``Making Clausal theorem provers Non-clausal'',
{\em Proc.\ CSCSI-84}. pp.~124-125.
\bibitem[Poole86]{poole:grace}
D.\ L.\ Poole,
``Gracefully adding Negation to Prolog'',
{\em Proc.~Fifth International Logic Programming Conference},
London, pp.~635-641.
\bibitem[Poole86]{poole:dd}
D.\ L.\ Poole,
``Default Reasoning and Diagnosis as Theory Formation'',
Technical Report, CS-86-08, Department of Computer Science,
University of Waterloo, March 1986.
\bibitem[Poole87a]{poole:vars}
D.\ L.\ Poole,
``Variables in Hypotheses'',
{\em Proc.~IJCAI-87}, pp.\ 905-908.
\bibitem[Poole87b]{poole:dc}
D.\ L.\ Poole,
{\em Defaults and Conjectures: Hypothetical Reasoning for Explanation and
Prediction}, Research Report CS-87-54, Department of
Computer Science, University of Waterloo, October 1987, 49 pages.
\bibitem[Poole88]{poole:lf}
D.\ L.\ Poole,
{\it A Logical Framework for Default Reasoning},
to appear {\em Artificial Intelligence}, Spring 1987.
\bibitem[PGA87]{pga}
D.\ L.\ Poole, R.\ G.\ Goebel and R.\ Aleliunas,
``Theorist: A Logical Reasoning System for Defaults and Diagnosis'',
in N. Cercone and G. McCalla (Eds.)
{\it The Knowledge Frontier: Essays in the Representation of
Knowledge},
Springer Varlag, New York, 1987, pp.\ 331-352.
\bibitem[Reiter80]{reiter80}
R.\ Reiter,
``A Logic for Default Reasoning'',
{\em Artificial Intelligence},
Vol.\ 13, pp 81-132.
\bibitem[Smith86]{smith86}
D.~Smith and M.~Genesereth,
``Ordering Conjunctive Queries'',
{\em Artificial Intelligence}.
\bibitem[Van Hentenryck87]{vanh}
P.\ Van Hentenryck,
``A Framework for consistency techniques in Logic Programming''
IJCAI-87, Milan, Italy.
\end{thebibliography}
\printindex
\end{document}
*/
tnumbervars(Term, N, M):- numbervars(Term, N, M).
/*
tnumbervars(Term, N, Nplus1) :-
var(Term), !,
Term = var/N,
Nplus1 is N + 1.
tnumbervars(Term, N, M) :-
Term =.. [_|Args],
numberargs(Args,N,M).
numberargs([],N,N) :- !.
numberargs([X|L], N, M) :-
numberargs(X, N, N1),
numberargs(L, N1, M).
*/
:- include(snark_klsnl).
:- thconsult(all_ex).
:- fixup_exports.
end_of_file.
fact askable_t(KB,IDEA) ; fallacy_t(KB,IDEA).
% autoloading snark_theorist:append/3 from /usr/local/lib/swipl-7.5.4/library/lists
% autoloading snark_theorist:portray_clause/1 from /usr/local/lib/swipl-7.5.4/library/listing
prv_tru_askable_t(A, B, _, anc(C, _)) :-
id_member(askable_t(A, B), C), !,
fail.
prv_not_askable_t(A, B, _, anc(_, C)) :-
id_member(askable_t(A, B), C), !,
fail.
ex_tru_askable_t(D, E, ths(A, A, B, B), anc(F, _), ans(C, C)) :-
id_member(askable_t(D, E), F), !,
fail.
ex_not_askable_t(D, E, ths(A, A, B, B), anc(_, F), ans(C, C)) :-
id_member(askable_t(D, E), F), !,
fail.
prv_tru_askable_t(A, B, _, anc(_, C)) :-
member(askable_t(A, B), C).
prv_not_askable_t(A, B, _, anc(C, _)) :-
member(askable_t(A, B), C).
ex_tru_askable_t(D, E, ths(A, A, B, B), anc(_, F), ans(C, C)) :-
member(askable_t(D, E), F).
ex_not_askable_t(D, E, ths(A, A, B, B), anc(F, _), ans(C, C)) :-
member(askable_t(D, E), F).
prv_tru_askable_t(_, _, _, anc(B, C)) :-
flagth((depth_bound, A)),
number(A),
length(B, D),
length(C, E),
D+E>A, !,
fail.
prv_not_askable_t(_, _, _, anc(B, C)) :-
flagth((depth_bound, A)),
number(A),
length(B, D),
length(C, E),
D+E>A, !,
fail.
ex_tru_askable_t(_, _, ths(A, A, B, B), anc(E, F), ans(C, C)) :-
flagth((depth_bound, D)),
number(D),
length(E, G),
length(F, H),
G+H>D, !,
fail.
ex_not_askable_t(_, _, ths(A, A, B, B), anc(E, F), ans(C, C)) :-
flagth((depth_bound, D)),
number(D),
length(E, G),
length(F, H),
G+H>D, !,
fail.
prv_tru_askable_t(A, B, C, anc(D, E)) :-
prv_not_fallacy_t(A,
B,
C,
anc([askable_t(A, B)|D], E)).
ex_tru_askable_t(A, B, C, anc(D, E), F) :-
ex_not_fallacy_t(A,
B,
C,
anc([askable_t(A, B)|D], E),
F).
prv_tru_fallacy_t(A, B, _, anc(C, _)) :-
id_member(fallacy_t(A, B), C), !,
fail.
prv_not_fallacy_t(A, B, _, anc(_, C)) :-
id_member(fallacy_t(A, B), C), !,
fail.
ex_tru_fallacy_t(D, E, ths(A, A, B, B), anc(F, _), ans(C, C)) :-
id_member(fallacy_t(D, E), F), !,
fail.
ex_not_fallacy_t(D, E, ths(A, A, B, B), anc(_, F), ans(C, C)) :-
id_member(fallacy_t(D, E), F), !,
fail.
prv_tru_fallacy_t(A, B, _, anc(_, C)) :-
member(fallacy_t(A, B), C).
prv_not_fallacy_t(A, B, _, anc(C, _)) :-
member(fallacy_t(A, B), C).
ex_tru_fallacy_t(D, E, ths(A, A, B, B), anc(_, F), ans(C, C)) :-
member(fallacy_t(D, E), F).
ex_not_fallacy_t(D, E, ths(A, A, B, B), anc(F, _), ans(C, C)) :-
member(fallacy_t(D, E), F).
prv_tru_fallacy_t(_, _, _, anc(B, C)) :-
flagth((depth_bound, A)),
number(A),
length(B, D),
length(C, E),
D+E>A, !,
fail.
prv_not_fallacy_t(_, _, _, anc(B, C)) :-
flagth((depth_bound, A)),
number(A),
length(B, D),
length(C, E),
D+E>A, !,
fail.
ex_tru_fallacy_t(_, _, ths(A, A, B, B), anc(E, F), ans(C, C)) :-
flagth((depth_bound, D)),
number(D),
length(E, G),
length(F, H),
G+H>D, !,
fail.
ex_not_fallacy_t(_, _, ths(A, A, B, B), anc(E, F), ans(C, C)) :-
flagth((depth_bound, D)),
number(D),
length(E, G),
length(F, H),
G+H>D, !,
fail.
prv_tru_fallacy_t(A, B, C, anc(D, E)) :-
prv_not_askable_t(A,
B,
C,
anc([fallacy_t(A, B)|D], E)).
ex_tru_fallacy_t(A, B, C, anc(D, E), F) :-
ex_not_askable_t(A,
B,
C,
anc([fallacy_t(A, B)|D], E),
F).
true.
prv_tru_askable_t(A, B, C, anc(D, E)) :-
prv_not_fallacy_t(A,
B,
C,
anc([askable_t(A, B)|D], E)).
ex_tru_askable_t(A, B, C, anc(D, E), F) :-
ex_not_fallacy_t(A,
B,
C,
anc([askable_t(A, B)|D], E),
F).
prv_tru_fallacy_t(A, B, C, anc(D, E)) :-
prv_not_askable_t(A,
B,
C,
anc([fallacy_t(A, B)|D], E)).
ex_tru_fallacy_t(A, B, C, anc(D, E), F) :-
ex_not_askable_t(A,
B,
C,
anc([fallacy_t(A, B)|D], E),
F).
snark_theorist: ?- fact foo(1,2,3).
prv_tru_foo(A, B, C, _, anc(D, _)) :-
id_member(foo(A, B, C), D), !,
fail.
prv_not_foo(A, B, C, _, anc(_, D)) :-
id_member(foo(A, B, C), D), !,
fail.
ex_tru_foo(D, E, F, ths(A, A, B, B), anc(G, _), ans(C, C)) :-
id_member(foo(D, E, F), G), !,
fail.
ex_not_foo(D, E, F, ths(A, A, B, B), anc(_, G), ans(C, C)) :-
id_member(foo(D, E, F), G), !,
fail.
prv_tru_foo(A, B, C, _, anc(_, D)) :-
member(foo(A, B, C), D).
prv_not_foo(A, B, C, _, anc(D, _)) :-
member(foo(A, B, C), D).
ex_tru_foo(D, E, F, ths(A, A, B, B), anc(_, G), ans(C, C)) :-
member(foo(D, E, F), G).
ex_not_foo(D, E, F, ths(A, A, B, B), anc(G, _), ans(C, C)) :-
member(foo(D, E, F), G).
prv_tru_foo(_, _, _, _, anc(B, C)) :-
flagth((depth_bound, A)),
number(A),
length(B, D),
length(C, E),
D+E>A, !,
fail.
prv_not_foo(_, _, _, _, anc(B, C)) :-
flagth((depth_bound, A)),
number(A),
length(B, D),
length(C, E),
D+E>A, !,
fail.
ex_tru_foo(_, _, _, ths(A, A, B, B), anc(E, F), ans(C, C)) :-
flagth((depth_bound, D)),
number(D),
length(E, G),
length(F, H),
G+H>D, !,
fail.
ex_not_foo(_, _, _, ths(A, A, B, B), anc(E, F), ans(C, C)) :-
flagth((depth_bound, D)),
number(D),
length(E, G),
length(F, H),
G+H>D, !,
fail.
prv_tru_foo(1, 2, 3, _, _).
ex_tru_foo(1, 2, 3, ths(A, A, B, B), _, ans(C, C)).
true.
snark_theorist: ?- fact foo(1,2,4).
prv_tru_foo(1, 2, 4, _, _).
ex_tru_foo(1, 2, 4, ths(A, A, B, B), _, ans(C, C)).